Gizmo Answer Key: Bohr Model: Introduction

Name: Edwin Benson Date: 11-10-2022 Student Exploration: Bohr Model: Introduction Directions: Follow the instructions to go through the simulation. Respond to the questions andprompts in the orange boxes. Vocabulary: absorption spectrum, Bohr model, electron volt, energy level, laser, orbit, photon Prior Knowledge Questions (Do these BEFORE using the Gizmo.) When light passes through a gas, certain wavelengths of the light are absorbed. The result is a unique absorption spectrum . Two examples are shown below. 1. What colors of light are absorbed by hydrogen gas? The colors encircled by the vertical black lines are those that hydrogen gas has absorbed. 2. What colors of light are absorbed by helium gas? The colors surrounded by the vertical black lines are those that helium gas has absorbed. Gizmo Warm-up In 1913, Niels Bohr proposed that the uniquespectral lines created by different elements wererelated to the way electrons were arranged aroundthe nucleus. The Bohr Model: Introduction Gizmo explores this connection. The laser shown in the Gizmo can emit photons , or particles of light, at a variety of wavelengths.The energy of a photon, measured in electron volts (eV), is inversely proportional to its wavelength. Photons that pass through the gasare detected by the photon detector at right. 1. With the Energy (eV) set to 1 eV, click Fire . Did the photon go straight through the gas in the tube, or was it absorbed by the gas? It passed directly through the gas. 2. Set the Energy (eV) to 4 eV, and click Fire . What happened this time? The photon was absorbed by the gas. Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved

Activity A: Absorptionspectra Get the Gizmo ready: ● On the SIMULATION pane, select Lamp . ● Check that Gas A is selected. Introduction: The smaller the wavelength of a photon, the greater its energy. We can see photons with wavelengths between 700 nanometers (red) and 400 nanometers (violet), corresponding to energies between1.8 and 3.1 eV. Question: What does the absorption spectrum of an element indicate about its electron configuration? 1. Record: Click Fire . The lamp emits photons of 1 eV, 2 eV, and so on up to 20 eV. The EL Photon Detector Display shows the photons that pass directly through the gas. Any missing photons were absorbed by the gas before being reemitted at various angles. Which photon energies were absorbed by Gas A ? 4, 7, 13, and 19 2. Observe: Select the Laser on the left and the ORBITS tab on the right. Set the Energy (eV) to 4 eV. The atom model at right, called the Bohr model , shows the nucleus of the atom as a purple dot. Colored rings surrounding the nucleus represent the orbits that the electron (blue dot) can follow. The variable “n” represents the orbital number. Click Fire and watch closely. What happens? When more energy was added, the electron briefly changed orbitals, but when the additionalenergy was removed, it reverted to its previous orbital. 3. Analyze: Click Fire again. This time, focus on the colors of the photons that enter and exit the atom. A. What color is the incoming 4-eV photon? Blue B. What happens to the electron when the photon is absorbed? It alters orbits C. What color is the emitted photon? Blue D. What happens to the electron when the photon is emitted? It goes back to its original orbital E. If necessary, turn on Show energy of emitted photon(s) . What is the energy of the emitted photon? 4 eV Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved

4. Predict: What do you think will happen if you fire a 7-eV photon at the atom of Gas A ? How about a 13-eV or a 19-eV photon? The electron will move to orbitals that are farther away. 5. Gather data: Test your predictions with the Gizmo and fill in the table below. (The first row has been filled in for you.) Photon energy Effect on electron Energy of emitted photon(s) 4 eV Electron moves up to n = 2 and then back down to n = 1. 4 eV 7 eV The electron climbs to n=3 before descending to n=1. 4 eV and 3 eV 13 eV The electron climbs to n=4 before descending to n=1. 4 eV and 9 eV 19 eV The electron climbs to n=5 before descending to n=1. 4 eV and 15 eV 6. Analyze: Find the total energy of each set of emitted photons. How does each sum relate to the energy of the absorbed photon? Yes, it has only been divided. 7. Explore: With the Energy (eV) set to 19 eV, click Fire six times. Record the energy of the emitted photons each time. Record the results of each trial below. Trial Energy of emitted photons Trial Energy of emitted photons 1 3 eV, 4 eV, 6 eV and 6 eV 4 3 eV, 4 eV, 6 eV and 6 eV 2 6 eV and 13 eV 5 3 eV, 4eV, 12 eV 3 3 eV, 4 eV, 6 eV and 6 eV 6 4 eV and 15 eV 8. Analyze: When an electron moves from a higher orbit to a lower one, does it always follow the same path? Explain. No, it has multiple ways to distribute the energy used to move it to the higher orbital. Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved

Activity B: Energy levels Get the Gizmo ready: ● Select the ENERGY LEVELS tab.● Check that Gas A is selected. Introduction: When an electron absorbs a photon, it gains energy, causing it to move to a higher orbit. Because each possible orbit is associated with a specific amount of energy, the orbits are known as energy levels . Each element has a unique set of energy levels. Question: How are energy levels related to absorption spectra? 1. Record: By convention, an energy of 0 eV is assigned to the energy level that is infinitely far from the nucleus. As a result, each energy level is assigned a negative energy value. The energy levels for Gas A are shown on the graph. What is the energy of each level? n = 1: -20 n = 2: -16 n = 3: -13 n = 4: -7 n = 5: -1 2. Calculate: How much energy would an electron have to gain to move from n = 1 to n = 4? 13 eV 3. Test: Set the Energy (eV) to this level and click Fire . What happened? The electron shifted to the n=4 level of energy. 4. Make connections: Recall that Gas A absorbs photons with the following energies: 4 eV, 7 eV, 13 eV, and 19 eV. How do these values relate to the energy level diagram? Test your ideas using theGizmo. Without exceeding the required energy level, they each raise the electron to the followingenergy level. 5. Record: Each element has a unique configuration of energy levels. Select Gas B and record the energy of each energy level for this gas. n = 1: -19 n = 2: -14 n = 3: -13 n = 4: -8 n = 5: -2 6. Predict: Based on these energy levels, which photons do you expect Gas B to absorb? Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved

5 eV, 6 eV, 11 eV, and 17 eV 7. Test: Select the Lamp and click Fire . Which photons were absorbed by Gas B ? 5 eV, 6 eV, 11 eV, and 17 eV 8. Record: Select Gas C and click Fire . Which photons were absorbed by Gas C ? 3 eV, 8 eV, 11 eV, and 16 eV 9. Apply: Select the Laser . Based on the data you collected, draw an energy levels graph for Gas C . When you have finished, select the ENERGY LEVELS tab to check your answer. Fill in the actual graph on theright. (Hint: In Gas C , the first energy level is -18 eV.) Predicted Actual 10. Practice: For Mystery A and Mystery B , you are not given the actual energy level diagram. Use the EL Photon Detector Display to infer the energy level diagrams for each mystery element. (Hint: For each mystery gas, assume the first energy level is -20 eV.) Mystery A Mystery B Reproduction for educational use only. Public sharing or posting prohibited. © 2020 ExploreLearning™ All rights reserved